Transporteur
Apr 8, 01:51 PM
Considering all the times i've almost been mugged, and that one freaking time my ipod touch was taken in a matter of seconds.. i wouldn't mind getting one of these. =P
The iGun is probably more effective, not too good to hide at the beach, though. ;)
http://www.unhelpful.org/igun/igun1.jpg
Pic taken from http://www.unhelpful.org/igun
The iGun is probably more effective, not too good to hide at the beach, though. ;)
http://www.unhelpful.org/igun/igun1.jpg
Pic taken from http://www.unhelpful.org/igun
mainstreetmark
Jun 23, 01:40 PM
wow - this is a really new forum. there's only 15 members.
RMo
Jan 21, 09:21 PM
What the heck is a brother printer?
This is a term I am unfamiliar with.
You need to get out more, and it's crucially a capital "B." :)
This is a term I am unfamiliar with.
You need to get out more, and it's crucially a capital "B." :)
Naimfan
Mar 1, 02:10 PM
President Obama�s decision to no longer defend the so-called �Defense of Marriage Act� in court is the courageous and correct one. DOMA was a disaster and a huge step backwards from the instant it was signed into law. President Obama�s decision gives me hope that we as a nation can address the far more significant challenges and problems we face. We can only hope that his decision spells the beginning of the end of DOMA, and that it is a signpost of the continuing progress we as a nation have made in tolerating, and indeed, celebrating those people who are different from us in whatever form.
For me the question of same-sex marriage boils down to this: Love is hard enough to find. If two men or two women find love together, and want to publicly declare and celebrate it, who are we to tell them they cannot? If anyone can think of a dumber reason to discriminate against someone, please let me know. Just as I would not want anyone else to have a veto power over who I might choose to marry, I do not, and should not, have veto power over who someone else might choose to marry. Nor should the government.
That said, if a particular religious denomination chooses not to perform same-sex marriages, that may be their right. The government, however, has no such discretion, and should not. The idea that the government should act as �custos mores� (The Guardian of Morals�) is long past.
As Justice Kennedy wrote in Romer v. Evans, 517 U.S. 620 (1996) �We must conclude that Amendment 2 classifies homosexuals not to further a proper legislative end but to make them unequal to everyone else. This Colorado cannot do. A State cannot so deem a class of persons a stranger to its laws.� Romer v. Evans, 517 U.S. 620 (1996) (emphasis added).
The arguments against same-sex marriage are ludicrous. Distilled to their essence, they all reduce to the idea that marriage has traditionally been between a man and a woman, and so it should stay that way. If marriage were on the same legal level as joining a social club, and no state action were involved, that would be fine. But the instant the government becomes involved, our government is required to treat everyone equally. Allowing only certain groups to avail themselves of the legal benefits and protections of marriage violates the principle of equal protection of the law, and there is simply no rational or compelling state interest to do so that could justify such a separation. The argument that �But we�ve always done it that way� simply does not, and cannot, justify prohibiting same-sex marriage. It is no more than the tired refrain of the intellectually bankrupt who reflexively oppose any change that does not directly benefit them.
And so President Obama should be celebrated for taking a step to promote the equality of all in the United States. With his decision and announcement, we are one step closer to the ideal of judging a person not by what they look like, or whom they associate with, but by the content of their character and by the actions they take.
For me the question of same-sex marriage boils down to this: Love is hard enough to find. If two men or two women find love together, and want to publicly declare and celebrate it, who are we to tell them they cannot? If anyone can think of a dumber reason to discriminate against someone, please let me know. Just as I would not want anyone else to have a veto power over who I might choose to marry, I do not, and should not, have veto power over who someone else might choose to marry. Nor should the government.
That said, if a particular religious denomination chooses not to perform same-sex marriages, that may be their right. The government, however, has no such discretion, and should not. The idea that the government should act as �custos mores� (The Guardian of Morals�) is long past.
As Justice Kennedy wrote in Romer v. Evans, 517 U.S. 620 (1996) �We must conclude that Amendment 2 classifies homosexuals not to further a proper legislative end but to make them unequal to everyone else. This Colorado cannot do. A State cannot so deem a class of persons a stranger to its laws.� Romer v. Evans, 517 U.S. 620 (1996) (emphasis added).
The arguments against same-sex marriage are ludicrous. Distilled to their essence, they all reduce to the idea that marriage has traditionally been between a man and a woman, and so it should stay that way. If marriage were on the same legal level as joining a social club, and no state action were involved, that would be fine. But the instant the government becomes involved, our government is required to treat everyone equally. Allowing only certain groups to avail themselves of the legal benefits and protections of marriage violates the principle of equal protection of the law, and there is simply no rational or compelling state interest to do so that could justify such a separation. The argument that �But we�ve always done it that way� simply does not, and cannot, justify prohibiting same-sex marriage. It is no more than the tired refrain of the intellectually bankrupt who reflexively oppose any change that does not directly benefit them.
And so President Obama should be celebrated for taking a step to promote the equality of all in the United States. With his decision and announcement, we are one step closer to the ideal of judging a person not by what they look like, or whom they associate with, but by the content of their character and by the actions they take.
more...
neocell
Sep 20, 02:38 AM
Well crap. Is Hitler back from the dead or something?
:p
Bad joke. I'm tired. Night-night.
This is a good night for random outbursts of laughter. Now that I have spittle all over my PB's screen from this one I can try WillMak's (http://forums.macrumors.com/showthread.php?t=150310) cleansing solution. :D
:p
Bad joke. I'm tired. Night-night.
This is a good night for random outbursts of laughter. Now that I have spittle all over my PB's screen from this one I can try WillMak's (http://forums.macrumors.com/showthread.php?t=150310) cleansing solution. :D
leftyMac
Feb 22, 12:36 AM
if you are patient enough, craigslist / kijiji will do the job.
more...
kdoug
May 2, 03:23 PM
Hi all,
I have a mid-2009 15� MBP. Last year I upgraded my 500GB HDD with a 160GB SSD. Overall I love the results and believe it�s one of the best hardware upgrades I have made in recent years.
However, 160GB quickly becomes difficult to work with (especially with multiple VMs) so I am keen to look for another internal storage solution.
This is where OptiBay comes in. Allowing me to remove my optical drive (which I never use) and add an additional HDD.
I am keen to understand if anyone has any experience with OptiBay? Any issues or things I should know about?
My other problem is which one to buy? There are loads on eBay, but I worry about quality. So I have narrowed my search to:
MCE OptiBay (http://www.mcetech.com/optibay/) for $99 or iFixit OptiBay (http://www.ifixit.com/Apple-Parts/9-5-mm-SATA-Optical-Bay-SATA-Hard-Drive-Enclosure/IF107-080) for $59.95?
Any thoughts? I consider iFixit to be a reparable company and it�s cheaper, but I don't want to drop quality.
Any thoughts?
Thanks in advance.
Or this one; http://www.maxupgrades.com/istore/index.cfm?fuseaction=category.display&category_ID=348
Another option; http://www.newmodeus.com/shop/index.php?main_page=product_info&cPath=2_27&products_id=259
Lots of choices.......
I have a mid-2009 15� MBP. Last year I upgraded my 500GB HDD with a 160GB SSD. Overall I love the results and believe it�s one of the best hardware upgrades I have made in recent years.
However, 160GB quickly becomes difficult to work with (especially with multiple VMs) so I am keen to look for another internal storage solution.
This is where OptiBay comes in. Allowing me to remove my optical drive (which I never use) and add an additional HDD.
I am keen to understand if anyone has any experience with OptiBay? Any issues or things I should know about?
My other problem is which one to buy? There are loads on eBay, but I worry about quality. So I have narrowed my search to:
MCE OptiBay (http://www.mcetech.com/optibay/) for $99 or iFixit OptiBay (http://www.ifixit.com/Apple-Parts/9-5-mm-SATA-Optical-Bay-SATA-Hard-Drive-Enclosure/IF107-080) for $59.95?
Any thoughts? I consider iFixit to be a reparable company and it�s cheaper, but I don't want to drop quality.
Any thoughts?
Thanks in advance.
Or this one; http://www.maxupgrades.com/istore/index.cfm?fuseaction=category.display&category_ID=348
Another option; http://www.newmodeus.com/shop/index.php?main_page=product_info&cPath=2_27&products_id=259
Lots of choices.......
calculus
Jan 12, 09:53 AM
What is your opinion on Cisco and Apple's dispute?
iDontcare about this dispute.
iDontcare about this dispute.
more...
petvas
May 6, 09:10 AM
one thing in lion that will not get used for me is the launchpad. damn on my 27" ACD it's so big. i remember all of my installed apps and prefer to use spotlight for easy way to launch them.
I totally agree. Launchpad should run in a window. Spotlight is still the way to go for power users. Of course,normal people will like the launchpad.
I totally agree. Launchpad should run in a window. Spotlight is still the way to go for power users. Of course,normal people will like the launchpad.
RLUK
Jun 23, 12:17 PM
Has anyone asked how many handsets o2 have?
I asked today but they wouldn't say. They did say they would have both 16&32 gb models though. I'm hoping it'll just be us three in the queue, that way we'll all leave the store happy!
I asked today but they wouldn't say. They did say they would have both 16&32 gb models though. I'm hoping it'll just be us three in the queue, that way we'll all leave the store happy!
more...
f4780y
Apr 20, 05:51 PM
Can confirm it is also working on 4.3.2 following my upgrade tonight, so I don't know how anyone can consider it dead... Working perfectly for me.
thermodynamic
Apr 20, 03:37 PM
The problem isn't necessarily a mac driver, but Apple's Acceleration Curve. It works perfectly with Apple Mice, but not so much with other's. Now assuming that your issue is tracking issue and not customizable buttons, then my solution will work for you. Download USB overdrive and install it. If I remember correctly, you will have to restart your mac after installation. Now their is a free and a paid version, the free will work just fine. After installation, you can change the settings under system preferences -> USB Overdrive.
In the picture below, you will see two sliders. I find it helpful to have the top slider near the far right, and the bottom slider near the far left. I believe I also set the mouse speed (found in the normal mouse settings) around the middle, but you can set it anywhere.
As far as mice with mac drivers, I recently purchased the Logitech wireless m510. I am normally picky when it come to mice, but I do enjoy using it. After installing the logitech driver and uninstalling USB Overdrive, the mice works nicely. I've only had it for a few days, but I love it.
Thanks much; I will download and try it out shortly!
In the picture below, you will see two sliders. I find it helpful to have the top slider near the far right, and the bottom slider near the far left. I believe I also set the mouse speed (found in the normal mouse settings) around the middle, but you can set it anywhere.
As far as mice with mac drivers, I recently purchased the Logitech wireless m510. I am normally picky when it come to mice, but I do enjoy using it. After installing the logitech driver and uninstalling USB Overdrive, the mice works nicely. I've only had it for a few days, but I love it.
Thanks much; I will download and try it out shortly!
more...
gotohamish
Oct 30, 03:41 PM
People! Do we really want these people getting their mits on the beautiful iPod? Look at this pic from their home page... the 'average' Dell user puts their keyboard on top of the fruit bowl!
The mother is helping the daughter look up the words "profit" and "margin" in the dictionary. Somewhere where Apple will make more money per iPod than Dell will on some consumer PCs perhaps!:phttp://www.fourdegree.com/images/dim4550_8250.jpg
The mother is helping the daughter look up the words "profit" and "margin" in the dictionary. Somewhere where Apple will make more money per iPod than Dell will on some consumer PCs perhaps!:phttp://www.fourdegree.com/images/dim4550_8250.jpg
zap2
Apr 1, 10:28 AM
they get funnier every year....
joking? Because in the PS3 joke thread, you said you think people shouldn't be allowed on web on April 1st
joking? Because in the PS3 joke thread, you said you think people shouldn't be allowed on web on April 1st
more...
munkle
Jan 10, 10:51 AM
Another good keyboard shortcut is command(apple)+tab to shuffle through open apps.
Plus check out system preferences/keyboard & mouse/keyboard shortcuts. :)
Plus check out system preferences/keyboard & mouse/keyboard shortcuts. :)
olliemac
Mar 28, 04:47 PM
Got one! The Best Buy in Gatineau was showing online stock this afternoon. Called to confirm, found out they only had the 1 unit and then drove over ASAP. The exact model I wanted too... 64GB Black Wi-Fi only.
It was a return item so there's hope for more! Good luck!
It was a return item so there's hope for more! Good luck!
more...
CaptainChunk
May 5, 01:09 AM
Yes, everybody would like to know more, but what's another month? Besides, here's the thing:
1. FCP X is a complete rewrite. As such, we'll be dealing with what's essentially a 1.0 product. The professional post production community isn't going to jump to ship until FCP X reaches a reasonable level of maturity (and stability) they're already getting with FCP 7. And that will take a while to happen.
2. I think Apple knows this (above) and it's likely the reason they were pretty selective about what they revealed at NAB. I think they expect that FCP X will sell to enthusiasts first and will eventually make its way into professional workflows as the platform gains more acceptance and support from the third-parties. Workflow and stability are everything in a pro environment; this will always trump features. In the end, Apple's approach was better than over-promising on what they may not be able to deliver yet.
I've already decided that unless by some miracle FCP X can really replace my FCP 7 workflow straight out of the box in June (highly unlikely), I'm not buying it until it truly can, even if it's only $300. I'm sure the post houses feel the same way...
1. FCP X is a complete rewrite. As such, we'll be dealing with what's essentially a 1.0 product. The professional post production community isn't going to jump to ship until FCP X reaches a reasonable level of maturity (and stability) they're already getting with FCP 7. And that will take a while to happen.
2. I think Apple knows this (above) and it's likely the reason they were pretty selective about what they revealed at NAB. I think they expect that FCP X will sell to enthusiasts first and will eventually make its way into professional workflows as the platform gains more acceptance and support from the third-parties. Workflow and stability are everything in a pro environment; this will always trump features. In the end, Apple's approach was better than over-promising on what they may not be able to deliver yet.
I've already decided that unless by some miracle FCP X can really replace my FCP 7 workflow straight out of the box in June (highly unlikely), I'm not buying it until it truly can, even if it's only $300. I'm sure the post houses feel the same way...
Pete_Hoover
Jul 1, 09:50 AM
Originally posted by mnkeybsness
for ichat AV you need a firewire camera. it will not work with any usb or usb2 cameras.
That stinks. They shuould make it capable to do video with USB cams. They are cheaper. The quality is not as good, but they are cheaper.
for ichat AV you need a firewire camera. it will not work with any usb or usb2 cameras.
That stinks. They shuould make it capable to do video with USB cams. They are cheaper. The quality is not as good, but they are cheaper.
cocacolakid
May 4, 02:59 PM
Congrats on a nice purchase.
Here is the Everymac.com page for that machine. (http://www.everymac.com/systems/apple/powermac_g5/stats/powermac_g5_2.5_dp.html)
As for future support for syncing iOS devices, iTunes will be the biggest culprit. iTunes 10 requires 10.5.8, it's likely that the next major update to iTunes requires 10.6, which PPC's can't run. The big question is, how soon until that happens? With Lion due out this summer, I doubt it will take 2 years before Apple drops support for Leopard.
Here is the Everymac.com page for that machine. (http://www.everymac.com/systems/apple/powermac_g5/stats/powermac_g5_2.5_dp.html)
As for future support for syncing iOS devices, iTunes will be the biggest culprit. iTunes 10 requires 10.5.8, it's likely that the next major update to iTunes requires 10.6, which PPC's can't run. The big question is, how soon until that happens? With Lion due out this summer, I doubt it will take 2 years before Apple drops support for Leopard.
nobunaga209
Jul 12, 02:23 PM
Magic Orbz FTW if you want to go with a PSN network game; otherwise you gotta go with Final Fantasy VII! :D
amberashby
Jan 11, 07:01 AM
Hi,
I'm trying to install 10.3 on an old Tangerine G3 333 iMac. I've upgraded the RAM and the OS9 that was already instlalled was running fine. I then swapped out the HD booted off of the 10.3 install CD, erased HD and partitioned it to 7GB/33GB.
So far so good. I start the install and everything seems to be going just fine, but it never ask for the 2nd install CD. It goes through disk optimization and everything while still on the 1st CD. Then it reboots itself, but fails to find the OS on the HD and ends up wanting to install again.
I've done this 4 or 5 times now and can't figure out what is happening. Anyone have any ideas?
Thanks.
I'm trying to install 10.3 on an old Tangerine G3 333 iMac. I've upgraded the RAM and the OS9 that was already instlalled was running fine. I then swapped out the HD booted off of the 10.3 install CD, erased HD and partitioned it to 7GB/33GB.
So far so good. I start the install and everything seems to be going just fine, but it never ask for the 2nd install CD. It goes through disk optimization and everything while still on the 1st CD. Then it reboots itself, but fails to find the OS on the HD and ends up wanting to install again.
I've done this 4 or 5 times now and can't figure out what is happening. Anyone have any ideas?
Thanks.
quantum003
Apr 29, 10:35 AM
I didn't know they had vinyl banners, those are cool. I have a couple of the Think Different posters: Picasso and Earhart. Nabbed 'em right off the wall from my old work immediately after they went out of business- yoink! :D
ascii42
Mar 19, 03:12 PM
That's probably it then. You have to install RAM in the G5 in matched pairs, meaning same speed and capacity.
seepel
Apr 2, 02:55 PM
One of my development computers is such Core 2 Duo MacBook @ 2GHz I bought in Feb 2007. I have Snow and SDK 3.2.6 on it and I wonder if its screen is too small for Xcode 4. Is anyone here running latest Xcode on 1280 x 800?
I often feel cramped with 1440x900 but I find it workable. Then again I am also probably spoiled with my 27" monitor that I'm over sensitive when away from it.
I often feel cramped with 1440x900 but I find it workable. Then again I am also probably spoiled with my 27" monitor that I'm over sensitive when away from it.
No comments:
Post a Comment